RadPro® OT1
Overhead Radiographic Suite
The RadPRO® OT1 Overhead Radiography system is perfect
for busy hospitals and outpatient centers. This system is equipped standard with a high frequency generator (100kHz), four-way float table (600
lbs capacity) and heavy duty overhead tube crane that allows for easy, efficient exams needed by today's high volume hospital imaging departments.
Overhead system
Control panel
Upright stand
Closeup of tube mounted operator panel
Tube mounted operator panel
4 way float elevationg table
| Perfect for High Volume Orthopedic, Hospital and Outpatient Facilities |
| Elevating 4-Way Float Table w/ 600 lbs Lift Capacity |
| Heavy Duty Overhead Tube Crane |
| Digital Display of SID/Tube Angle |
| High Throughput and Versatile |
| Fully Upgradeable with Canon CXDI DR Imaging Systems |
| High Freguency Generator | 100kHz |
| High Speed Starter | Yes (Standard) |
| Automatic Exposure Control | Yes (Standard) |
| Automatic Programming | Yes, with easy programming on standard touch screen console |
| Power Output | 55 kW, 65 kW, 80 kW |
| Longitudinal Rail Length | 14' ft (4.27 m) [12', 16', 18' (Optional)] |
| Transverse Bridge Length | 120" in (3.03 m) (Standard) |
| Travel - Vertical | 60" in (152 cm) |
| Travel - Longitudinal | 9’ ceiling [ 114” in (290 cm) ], 8.5’ Ceiling [ 102” in (260 cm)] |
| Focus - Ceiling Distance | 9’ ceiling [ 37” in (94 cm)], 8.5’ Ceiling [ 26” in (66 cm)] |
| Focus - Floor Distance | 9’ ceiling [ 37” in (94 cm)], 8.5’ Ceiling [ 26” in (66 cm)] |
| Tube Support - Travel | 60” in (150 cm) |
| Tube Support - Rotation | +90°, -90° |
| X-Ray Tube | 300 kHu, 400 kHu, 600 kHu |
| Manual Collimator (VST-MC) | Rectangular Shaped Collimation Scales for SID’s 36”, 40”, 48”, 72” in Rotation by 45° degrees with a stop in 0° position by swiveling flange Light localizer lamp w/ time switch 30 sec. |
| Electrical Requirements | 115/220 VAC, 50/60 Hz, 5 Amps |
| Maximum Patient Weight | 600 lbs (272 kg) |
| Clearance - Side | 34" in (86 cm) |
| Clearance - Front | Rear | 5" in (13 cm) |
| Cassette Holder Travel | 20" in (51 cm) |
| Table Length | 50.75" in (129 cm) |
| Table Width | 28.37" in (72 cm) |
| Electrical Requirements | 115/220 VAC, 50/60 Hz, 10 Amps |
| Maximum Height | 80" in (203 cm) |
| Maximum Height to Center | 68" in (173 cm) |
| Minimum Height to Center | 15" in (38 cm) |
| Travel - Vertical | 53" in (134 cm) |
| Electrical Requirmenrts | 24 VAC, 50/60 Hz, 1 Amp |
